Shanghai Haozhuang tells you the precautions for the use of nitrogen blower
Shanghai Haozhuang Instrument Co., Ltd. develops the LNB brand nitrogen blower, which is energy-saving and environmentally friendly, leading the country. Nitrogen Blow Dryer (Termovap Sample Concentrator) is also known as: nitrogen concentrator, nitrogen purge, nitrogen blow concentrator, abbreviated as: nitrogen blower, nitrogen blower, used for sample preparation in liquid phase, gas phase and mass spectrometry analysis Using internationally recognized technology, the nitrogen blower usually blows nitrogen into the surface of the heated sample for sample concentration. It has the characteristics of time saving, convenient operation and easy control, and can quickly obtain the expected results. Widely used in industries such as pesticide analysis, commodity inspection, food, environment, pharmaceuticals, biological products, etc. 6. Immersion: The bottom of the bath is water resistant but not waterproof. Never immerse the water bath in any liquid or place it where it may occur. We do every set of equipment, every project, every link, strictly abide by the credibility and commitment, Shanghai Haozhuang welcomes you!
Using the Over Door Hanging Rack, you can create more storage space for belts, jewelry, scarves, hats and morein your closet and elsewhere. It can be used it on any door in your home, closet door or bathroom door, inside or out, with no nails and no glue. Over Door Hooks fits over any standard door. Welcome new and old customers contact us, and we will provide first-class products and quality service to you.
Over Door Hanging Rack Over Door Hooks,Over The Door Hooks,Over The Door Hanger,Over The Door Storage Xinhui Mingcheng Hardware Mamufacture Limited of Jiangmen City , https://www.gd-jmmc.com
(2) When using a nitrogen blower, hands and eyes should be protected.
(3) The nitrogen blower should be used in a fume hood to ensure good ventilation.
(4) Do not move the nitrogen blower during heating to prevent burns.
(5) Use a three-wire grounded power supply.
(6) Do not open the shell of the water bath with power on to prevent electric shock.
(7) The maintenance of the nitrogen blower should be performed by professionals. Improper replacement of components may cause damage to the nitrogen blower or cause safety hazards.
(8) Do not use nitrogen blower for highly flammable substances like petroleum ether.
(9) Do not use acidic or alkaline substances, otherwise the nitrogen blower will be damaged.
Use maintenance 1, heating medium: it is best to use distilled water and deionized water, which will prevent scale on the water bath wall. Be careful not to use organic solvents as heating medium.
2. Algaecide: When not heated, add algaecide in the water of the water bath to prevent biological pollution. No acidic algaecide should be used, and it should be ensured that the algaecide used will not affect the sample to be processed.
3. Change the water: It is recommended to change the water in the water bath once a week, the longest is no more than one month.
4. Acidic environment: When contacted or exposed to acidic materials, steam or samples, they should be cleaned immediately, neutralized with a moderate sodium bicarbonate solution or other similar solutions, and then rinsed with clean water. Prolonged exposure to acidic substances will damage the instrument. If you must be exposed to acidic substances for a long time, protective measures should be taken.
5. Needle: It should be cleaned after each use of the needle to minimize needle contamination. Organic solvent washing, autoclaving and Soxhlet extraction techniques can be used.