Luxury hardcover craft (on)

1, what is a luxury hardcover

Luxurious hard-packing method, generally speaking there are two points, one is the use of framed materials are valuable, such as the cover material in the leather (sheep, cowhide, snakeskin, etc.) and fabric in the satin, velvet, silk, linen, etc.; Materials such as red gold, silver foil, color tablets, and gemstones are complicated in design, such as gold-rolling mouths, flower-mouths, lock-in-heads, sticky linings, and bamboo shoots. From the outside, it is a very high-grade hardcover book. It is used to hold some ladies' items and can be used as a gift for relatives and friends.

2, luxury hardcover book core modeling

1) Lining material

Lining means that the same leather or fabric material as the bookcase shell fabric is bonded to the monoliner under the ring liner and that it functions in the same way as the book back fabric. However, it is firmer and more beautiful than the back of the book (opening the book is sealed in the second or third of the floating port is four sides and the same material), read flat (see Figure 1).

Figure 1 Sticky lining
1, lined material 2, single lining 3, sticky mouth

2) lining

The lining of the bag is a process of bonding the single sheet of the lining material with the ring lining to make the lining material stick to the ring lining. The function of the lining is to be locked together with the book booklet and connected with the book case ( See Figure 2)

Figure 2 lining
1, ring lining 2, a single lining 3, after the liner lining material

3) Gold gate

After the book is cut on three sides of the book block, on the incision on the side of the head (or three sides of the incision), a layer of gold foil, silver foil, or electro-aluminum foil is bonded by hot rolling, so that the cut of the book block appears bright gold or The silver color is used for processing, so it is called the gold port (see Figure 3)

Figure 3 Gold Pocket Book (with thumb index)

4) Flower mouth

The flower mouth refers to the process of making a variety of patterns on the side of the book block (front mouth) or three sides of the incision. The operation of the gargle is a process that is more complicated than the gilt-end process, more difficult to operate, and requires stricter quality requirements. The garnishes must be finished once and there is no room for rework, so operators are required to have Corresponding professional technical knowledge, but also have superb operating skills

5) lock flower head

Locking flower head refers to the upper and lower ends of the cut book are locked with silk rope instead of the processing of the plug cloth. Due to the durability of the flowers that are used to lock the ropes, they are beautiful and unique, so they can match the books of the Jinkou and Huakou.

6) From the bamboo section

Starting from the bamboo section means that the shape of the bulge on the book shell is shaped like a bamboo shape. The function is to make the book beautiful and generous, and to protect the waist of the waist firmly from wear, adding a sense of art to the book.

Hardcover luxury craft styling also has fake ridges, peelings and cardboards, padding, etc. The purpose is to decorate the books and make them durable.

Figure 4 from the bamboo book

3 luxury hardcover processing technology

1) Paste and paste operation and requirements

The length of the lining material is the same as the ring lining. About 25mm in width , the material is the same as the cover of the book, and vertical stripes are preferred. One side is adhered to the single lining, and the other side is adhered to the ring lining, sticking the mouth 3--4mm; the other broad side that has been bonded to the ring lining is locked after the book is cut, and is stuck on the bookcase cardboard when the cover is sheathed. The second and third seals have the same function as the back gauze, but they are firmer than the back gauze of the adhesive book, and they are beautiful and elegant (the width of the three sides of the book shell is the same as the width of the lining material after opening the cover). Figure 5) features.

Fig. 5 The same floating port after lining material bonding

Operation requirements: 1 according to the cover texture selected good adhesive (viscosity should be appropriate), smearing should be thin and uniform; 2 sticky mouth width 3--4mm, not skew; 3 sticky after the root material and single lining flat without wrinkle, no Adhesive glue, sticky mouth without opening phenomenon.

2) Package lining operation and requirements

Apply adhesive about 4mm wide on the adhesive edge of the ring liner (folding edge) , and then bond the single sheet of the lining material with the sticking edge of the lining material to the ring lining, and replace the lining material of the redundant edge. Wrap around the ring lining fold (see Figure 2) to lock the ring lining together in the book. After the extra material of the lining material is to be sheathed, it is adhered to the capsule.