Application method of vacuum drying oven
Toner Cartridge For Samsuang,Custom Samsung Toner Cartridge,Samsung Laser Printer Toner,Samsung 111S Toner jiangmen jinheng office equipment Co. Ltd. , https://www.jm-jinheng.com
1. Application method of vacuum drying oven 1) Power supply voltage: 220V50Hz 2) No corrosive gas around the surrounding 3) Temperature: 50 ℃ -230 ℃ 4) Relative wetting degree: ≤85 ％ RH 2. Press the SET button again to make The PV screen reveals the office temperature, and the SV screen reveals the new set temperature. 3. In the process of drying things, if you need to participate in nitrogen and other inert gases, you should indicate in the contract, and add an intake valve. Note: 1. If the air extractor is normal and meets the technical requirements, it is not possible to evacuate, then open the box door and use the wrench in the product attachment to twist the door buckle in the box body one circle to shorten and re-proof. 2. This vacuum drying oven cannot be used as an electric blast drying oven. 4. If the dryness of the dry matter in the office is relatively large, the sprouting water vapor will affect the performance of the air extractor. It is proposed to put a liquid water filter between the drying box and the air extractor. 5. Vacuum adjustment: close the box door and tighten the door handle in place, close the vent valve so that the hole on the rubber plug and the hole on the vent valve are twisted by 90 °, open the vacuum valve and rotate 90 ° counterclockwise, For the first time, it is possible that the vacuum valve switch is tight and can be rotated with strength.