The purchase of "wood" in the wardrobe is the king's three strokes to judge whether the board is good or bad.
[ Chinese wardrobe net ] home decoration, wardrobe is indispensable, whether it is to go to the mall to buy brand wardrobe or to ask the woodworker to make, we need to pay special attention to the material of the wardrobe. Because in a closed room, the wardrobe is one of the largest furniture in the bedroom, and the harmful gases emitted by it are also the majority. Today, the China Wardrobe Network introduces you to the common wardrobe panels and the skills to judge the wardrobe panels. At present, there are generally three kinds of materials used in the cabinet of the whole wardrobe . Wardrobe plate The first material is particleboard, and the sawn surface of the particleboard clearly sees the pulverized wood particles, gradually changing from the middle to the sides. It is made of medium long wood fiber and two sides of fine wood fiber. It has the advantages of low glue content and strong nail holding ability, but it is difficult to process, flatness is not as good as MDF, poor sealing and relatively cheap price. some. The second material is a large core board. The large core board refers to a kind of sheet which is laminated with a block of solid wood and then surface treated with an adhesive. The surface has a skin and is also directly polished. For the decoration of the substrate. The third material is a medium-density board, which is a kind of sheet which is made by using wood fiber or its plant fiber as raw material, applying urea-formaldehyde or Other synthetic resin, and pressing under heating and pressing conditions. The board has the advantages of high strength, smooth and smooth surface, uniform and fine structure, stable size, etc. MDF is the most commonly used material on the market. [Three strokes to judge whether the board is good or bad] Wardrobe plate 1, cut surface to see the material Look at the panel of the wardrobe is to use high-density board or particle board. Judging from the cut surface of the board, the fine fibers in the high-density board are tightly combined, and the density is large and heavy. The high-density board can withstand large pressure and has a long service life; while the fine particle structure of the particle board is not tight enough, even small pores can be seen, it is lighter in the hand, the gravity is small, and the service life is short. 2, smell the broken environmental protection Whether the sheet substrate is environmentally friendly, as long as the content of free formaldehyde in the sheet is ≤9mg/100g, that is, the European E1 environmental standard, it is not harmful to human health. The most direct way is to open the door and pull it open. If there is a strong irritating smell, even tears, indicating that the formaldehyde content exceeds the standard; the second is to look at the merchant's material testing certificate to see if it holds the relevant national wood-based panel quality. Inspection certificate of the testing center. 3, plate specifications should be kept in mind In order to reduce costs, some small manufacturers currently on the market usually sell dog meat and deceive consumers. The thickness of the standard cabinet body is 18mm, and the small manufacturers generally use the particle board as a high-density board to promote the board thickness of 16 mm, and the consumer said that the board is 18mm. The back panel of the wardrobe is typically 9 mm thick and the door panel is 9 mm thick. Stretch African Print Fabric,Printed Velvet Fabrics,Velvet Iraq Fabric,Polyester Fabric SHAOXING RICH HOPE TEXTILE CO.,LTD. , https://www.richhopetextile.com