Japan's bottle development trend

In recent years, due to the penetration of PET bottles, the demand for beverage cans has gradually decreased in the Japanese market. However, with the development of the new name bottle, the demand for the Ming tank began to rise again. At present, companies such as Takeuchi Co., Ltd., Daiwa Manufacturing Co., Ltd. and Mitsubishi Materials have entered the name bottle production field. The Ming bottle cover developed by Chaiqi Manufacturing Co., Ltd. was also put on the market at the same time.

It is reported that the newly developed bottle cans have the following characteristics: Compared with the original Ming tank, the appearance is beautiful and stylish, and can be re-sealed, easy to carry, easy to recycle: compared with PET bottles, light protection and barrier properties are greatly improved. The tank weight is reduced by 30%; the preservation performance of the loaded beverage is excellent, and the shelf life is prolonged.

There are certain differences between the Yamato jar and the Wunei constant pressure bottle industry. The Yamato canning product is: 28mm in diameter (in order to form this caliber, the bottom of the tank of the section tank is formed as the mouth); the lid, the tank body, and the bottom lid are all made of inscriptions; the weight of the bottle cans is 500ml. For example), only 67% of the PET bottles were used; the inside of the cans and the bottom cover was laminated with a low-density polyethylene and environmental measures were taken.

The difference between the Wuhe stamping industry and the Yamato can-making bottle is that the diameter is 38mm; the design of the tank is smooth and easy to print.

Mitsubishi Materials, after introducing the technology from the Takei stamping industry, has transformed the third production line of the Okayama factory into a special production line for the name bottle.

As this technology is attracting attention from the international community, it is likely that the demand for Ming bottles will further expand.