What should I do if the wardrobe sliding door is noisy?
[ Chinese wardrobe network ] When the general family chooses to buy a wardrobe , they will consider many factors, such as quality, price, size, etc., but summed up but a word: the best for you. Wardrobe sliding doors play an important role in the entire wardrobe, and you need to pay attention when purchasing peace. Everyone understands that the most important feature of sliding doors is that they are easy to switch. Even if the material of the door panel is not very good, it will not have a very big impact on the sliding door, but if the quality of the sliding door is not good, then It will seriously affect normal use, and the entire door will be scrapped. If the quality of the track is bad for a long time, it is easy to see that the door panel is out of orbit or difficult to push and pull. Just like human joint dislocation or arthritis, normal action will be seriously trapped. According to experts, the sliding door is easy to push and pull, no vibration, no noise. The slide rails must have a large bearing capacity, and are resistant to pressure and wear, and most of them are currently made of titanium-magnesium alloy slide rails. The sliding door of such materials generally requires more than 60,000 times of pushing and pulling, and the brand wardrobe can reach more than 100,000 times. The material of the pulley is also very important. At present, there are mainly three kinds of plastic pulleys, metal pulleys and glass fiber pulleys. The plastic pulley has a hard texture, but it will be sturdy and hard to slide for a long time. The metal pulley has high strength, but generates noise when it comes into contact with the rail; the glass fiber has good toughness, wear resistance and smooth sliding. In addition, good pulleys are often designed with two anti-jump devices to ensure that the sliding doors are safe and do not derail. So, what if the sliding door is noisy? 1. The hanging rail is too thin, use thicker hanging rails, or put hardwood on the two sides of the hanging rail; 2. The hanging rail is not smooth, uneven, and has burrs. The smooth and flat hanging rail is used. 3. The fixing screws are not tightened, tighten the screws, or replace the longer screws; 4. The fixing screws have a large spacing and the fixing screws are added; 5. There is a gap between the hanging rail and the door frame, so that the hanging rail is close to the door frame; 6, the hanging wheel bearing itself is of poor quality, replacement hanging; 7. The outer layer of the hanging wheel is not round, with dents, burrs or film lines, and the hanging wheel is replaced. Text from the network Dry Pipes,Silicone Hand Pipe,Silicone Dry Pipe,Smoking Hand Pipe Dongguan Chakou Silicone Products Co, Ltd , https://www.waxmaidwholesale.com