Selection and Application of Screen Cables in Screen Printing

(1) The relationship between the line number (line/CM) of the screen and the number of screen meshes (mesh/CM) in order to reduce the occurrence of water ripples (called moiré) due to the overlapping of the screen lines and the screen lines in the AM screen printing, Therefore, high-mesh screens are often used to make screen templates with low dot lines to reduce the appearance of moiré. However, the use of high-mesh screens is not economical, and at the same time, the color of the images on the low network lines Brightness is unfavorable, so the ratio between the number of screen lines and the number of screen meshes should be just right, that is, the most economical and applicable low-mesh screens should be used without the occurrence of moire. The ratio of screen cable to screen cable is generally 1:2.5 or 1:6.25, but the line/CM ratio is usually 1:3.75 or 1:5.

(2) Experience List screen printing screen number of optional screen mesh 24 lines / CM screen available for 120 mesh / CM; 28 lines / CM screen available for 140 mesh / CM; 30 lines / CM available wire The net is 150 meshes/CM; 40 lines/CMs are available with 150 meshes/CM; 44 lines/CMs are available with 165 meshes/CM; 48 lines/CMs are available with 180 meshes/CM. It is worth noting that in order to minimize image moiré in screen printing, in addition to a reasonable ratio of screen line and screen number, there is also the control of the thickness of the photosensitive layer on the screen, the screen stretching. Angle and tension, choose the method of plate making and so on.

(3) Before the number of screen cables was added, many screens used by printing and dyeing factories, knitted underwear factories, and handkerchief sheets factories were mostly 100-120 mesh. If you use international matching data: the number of screen meshes is equal to 4.2 times the number of screens. This way, 120-mesh screens can only add 28-line screens, and 100-mesh screens can only match 23-line screens. According to the minimum of textile printing, observe the pattern below 30 lines in the line-of-sight of 1M, and only see the dot network does not see the image, lose its meaning of screen printing. Therefore, in order to ensure that most of the outlets below 10% are not lost, a more practical and feasible approach is: the diameter of the minimum outlet = the diameter of the cell + the diameter of the wire. In addition to the elimination of moire measures, 120-mesh wire mesh can perfectly match the 45-50-55 line screen. Take the portrait of a color shirt on a cultural shirt as an example. The determination method is as follows: 1 Substrate plain weave cloth; 2 screen mesh number 120 mesh; 3 screen number 45 line; 4 screen angle yellow version 90, magenta version 15, blue version 45, Black Edition 75.