Packaging design and packaging cost savings
Components Components are a common window decoration that can effectively control light and ventilation. It consists of multiple independent horizontal or vertical rotatable lamellae, the angle of which can be adjusted by pull cord or manual operation to achieve the purpose of controlling light and privacy. Blinds usually consist of the following components: Components,Plantation Wooden Shutter Components,Plantation Shutter Components,Wooden Shutter Components Huaian Huiyuan Wooden Products Co.,Ltd , https://www.hyshutters.com
There are many problems faced by the packaging industry today. These problems directly lead to environmental destruction, material waste, and inefficiency. At the exchange meeting, Mr. Xian Mingzong summed up several major issues facing the industry:
1. The packaging design is complex, there are many types of materials, and the packaging efficiency is low;
2. Too much protection of the product;
3. The large packaging volume leads to a waste of logistics costs;
4. The utilization of container space is low.
In order to better solve the above problems, companies can improve from four aspects: the whole company's SCM (supply chain management system), logistics improvement, logistics cost reduction and bundle improvement. The company adopts different solutions according to its own purpose. Here are some Ricoh's design improvements in terms of environmental protection and cost savings:
As we all know, in order to protect our homes where we depend on, the use of paper packaging materials is more environmentally friendly. However, most of the corner lining materials used by packaging companies are EPS. This is mainly due to the strong load-bearing capacity of EPS materials and is suitable for transporting relatively heavy goods. For lighter goods, corrugated paper can be used. Thus, one ton of corrugated paper is required. Compared to EPS materials, it can reduce carbon dioxide emissions by thousands of tons per year. This small change has taken a big step forward for our environmental protection cause.
The production efficiency is the life of an enterprise. If the working time and labor intensity of each individual worker's packaging single product is reduced, not only the production efficiency is increased, but also the production enthusiasm of the employees is increased. In order to cope with this problem, Ricoh integrated the Components of the original packaged product and adopted an integrated packaging design scheme. The company integrated a number of discrete packaging components and designed it into a large-format material. The folding combination can be formed. Such a transformation will save the company thousands of dollars and even tens of thousands of dollars in packaging operations. In addition, the same product of different sizes can also adopt the same design. Only a certain adjustment of the crease position and a little follow-up supplement can reduce the subsequent waste and simplify the process.
In addition to improving efficiency, saving transportation costs is also one of the issues that companies are most concerned about. Taking shipping as an example, the space of each container is limited, and it is the expectation of every enterprise to put the goods to the maximum extent possible, but the number of yards should be scientific. This requires a thorough understanding of the strength and maximum load-bearing capacity of the carton, a reasonable increase in the number of stacks, a space saving for the container, and an increase in the utilization rate. Take Ricoh as an example: Before the improvement, each pallet could only hold 20 packages. After repeated paper tests, it was found that up to 44 packages can be held without damaging the items. This kind of improvement has produced a very obvious effect. With the annual purchase of 20,000 sets of trays, the annual reduction of the company's palletization fee is 37,000 yuan and the transportation cost is 70,000 yuan.
Through the rationalization and improvement of the continuous implementation of packaging, Ricoh Shanghai saved costs of approximately RMB 1.45 million in 2011. In the general environment where industry profits are generally reduced, cost savings are imminent. Ricoh's simple design and improvement will save the company a significant cost, which inspires other companies to brainstorm on their own merits and explore ways to save money for the company.
1. Laminate: The main component of a blind, usually made of wood, metal or plastic. The width and length of the lamellae can be customized to suit the size and design of the window.
2. Rail: A component used to support and guide the sheet, usually fixed to the window frame. The design of the guide rail can affect the rotation and adjustment of the sheet.
3. Pull cord: A cord used to control the rotation angle of the sheet. Usually, the opening and closing of the blinds can be adjusted by pulling the pull cord.
4. Adjustment rod: A rod-like component used to manually operate the angle of the lamellae, usually installed on one side of the blinds.
5. Fixed bracket: A component used to fix the blinds, usually installed on the window frame to ensure the stability and safety of the blinds.
In general, the various components of the blinds work together to achieve effective control of light and ventilation, while also adding beauty and comfort to the indoor space. When choosing blinds, you can choose blinds of different materials and design styles according to your own needs and preferences to achieve the best decorative effect.