How to give the baby a safe cot
When the baby is sleeping, the mother habitually puts the pillow against the bedside and lets the baby's head rest on the bed. This kind of sleep will give your baby a safety hazard. Because some babies love to tamper with when they are sleeping, and they usually move up. If the distance is too large, the head will hit the bed. Therefore, it is best for the mother to put the pillow in the middle of the cot so that the baby's feet will sleep close to the bed. 1, fence spacing The distance between the fences is too large, the child's body easily slides out, and the spacing is too small to affect the child's observation of the world outside the bed. The standard fence spacing should be about 8cm. 2, fence height The height of the fence should not be less than 60cm. On both sides of the fence, it is better to have a "sliding door" that is convenient to pull up and down, so that it is easy to take care of the baby. But be sure to check the firmness of the “sliding door†to prevent the baby from falling on the bed. 3, shop height When choosing a bed for your baby, decide on your bed height. The height of the baby's bed should be on the same plane as the adult's bed after laying the mattress, or a little lower than the adult's bed, so that the mother can sleep on the bed to see the baby and supervise his activity. 4, the width of the gap between the joints If there is a gap between the bed board and the bed, the guardrail and the headboard that is larger than 5mm and smaller than 12mm, that is, the distance between 6-11mm is dangerous. When you decide to buy a safe cot, don't forget to check this number. 5, whether the work is fine Under normal circumstances, the work is relatively rough bed, iron pipe welding will be very rough. With such a bed baby's little hand will suffer. In addition, we must carefully observe whether the mouth of the iron pipe is closed. If the nozzle is not closed, see a small hole, it will cause your baby's curiosity. When you reach out, you will inevitably be stabbed by welding slag and burrs in the iron pipe. In serious cases, your baby's fingers will be embedded inside. When you make a cot, you can't miss screws and other objects. When you buy a bed, don't forget to check the inside of the bed for screws and other things to avoid accidental injury to your baby. 6, formaldehyde concentration Bed bases are basically made up of wood boards such as plywood, glued wood boards, etc. These boards will contain formaldehyde components. So when buying a bed, if you smell a pungent odor, indicating excessive levels of formaldehyde, be careful when buying this bed. Bonliter is a professional manufacturer of Infrared Light Therapy,Infrared Light Therapy Device,Led Infrared Light Therapy.Our product is very popular in USA,Canada,Australia and other Europe countries Infrared Light Therapy,Infrared Light Therapy Device,Led Infrared Light Therapy Shenzhen Bonliter Optoelectronic Co., Ltd. , https://www.szbonliter.com