Heidelberg GTO52 equipment maintenance
Heidelberg GTO52 offset printing machine has firm structure, stable operation and strong adaptability. The Feida of this offset printing machine is easy to operate and reliable to feed. It is a crank piston cylinder to provide stable suction and blowing. Under normal circumstances, follow the instructions in the operation manual to maintain and maintain this air circuit system to ensure sufficient and stable suction and blowing. However, after long-term operation and frequent use of more powdered printing materials, inhalation and blowing will be weakened. At this time, in addition to the usual maintenance and repairs, it is also necessary to clean and maintain the cylinder and the gas circuit and other devices. Here, we will detail the cleaning and maintenance of crank piston or cylinder. the first: Remove the knob on the outside of the Feida transmission face shield (Regular fine-tuning diagram 1/1, red power switch diagram 1/2, rear blowing diagram 1/3, suction nozzle suction diagram 1/4, side paper lock Picture 1/5, Side paper handle Picture 1/6), the outer cover of the air pump (picture 1/7) can be removed directly, the regulation conversion cover (picture 1/8), the object tray (picture 1 / 9). The transmission surface shield (figure 1/10) must be loosened before the screws can be removed. second: Loosen the suction pipe connector (Figure 2/1), take out the filter and clean it. Use an Allen wrench to loosen the two Allen bolts (Picture 2/2) and remove the parts (Picture 2/3). third: Use an open end wrench to loosen the three hex screws (figure 3/1), remove the end cap (figure 3/2), and remove the two valves (figure 3/3) for cleaning. fourth: Wipe the oil in the cylinder with a clean cloth. fifth: Remove the end cover at the other end, clean the valve on the end cover, and wipe the oil in the cylinder. sixth: According to the disassembly order, all the parts can be put back in reverse. Massage Gun,Muscle Massage Gun,Function Massage Gun,Mini Massage Gun Ningbo Wellcome Trading Co., Ltd. , https://www.huike-homecare.com
Arranging such cleaning and maintenance work once a year is conducive to the normal operation of the equipment.