Ctp processor
After using the PS version/CTP plate processor for a period of time, the internal liquid tank is prone to crystallization and scaling, especially in the case of relatively hard water. The crystallization inside the processor can be washed with dilute hydrochloric acid. This article will introduce you to the ctp processor. Many users who use the T-series processor may encounter a failure when the button is turned on and any button on the touch screen is unresponsive. This failure will cause the processor to not enter the standby state normally. This fault is caused by the potential drift of the scanner's touch screen. If this happens, please follow the steps below to recalibrate the processor touch screen to troubleshoot. Turn on the main power of the processor. If the processor has been turned on, please turn off the main power of the processor and turn it on again. After the shutdown, please wait 20 seconds - 20 seconds before turning on the main power of the processor. After the screen correction is completed, the prompt message PressthegreenStartbutton will appear again on the screen. Now press the green start button next to the screen, the device starts normally, and the fault that the touch screen does not respond can be eliminated. Others include advanced equipment such as color Doppler imager, C-arm X-ray machine, medical film printer, etc. The manufacturer is actively guiding customers to adopt new methods for maintenance, helping to extend equipment life and reduce customer cost. It also laid a good foundation for further cooperation between the two sides. Article source address: http:// Pet Products,Elevated Dog Bowls,Cat Feeder,Automatic Cat Food Dispenser Green Source(Guangzhou) Co. Ltd. , https://www.stargalaxycn.com