All-in-one machine maintenance
Carry out regular maintenance to ensure the normal use of multifunctional integrated equipment. The following easy-to-use solutions help prevent problems and ensure that the device is always in top condition. All-in-one machine cleaning If you have an all-in-one device that can print, scan, copy, and even fax services, be sure to check at any time to see if you need cleaning. For example, if you notice ink, dust, or dirt on the device, or if dirt or ink marks appear on the document, it means the device has been cleaned. Scanner cleaning If black or white lines appear on the copies made, outgoing faxes, or scanned items, the scanner should be cleaned and recalibrated. To clean the scanner channel, follow these steps: 1 Disconnect power to the device. Printer cleaning In general, only a minimal amount of maintenance is required for the inkjet printer components of the all-in-one. However, regular cleaning can maintain its beautification and prevent printing problems in the future. The printer case is cleaned every time the ink cartridge is replaced. Please wipe with a damp cloth, and be careful not to let moisture get inside the printer. If necessary, use a soft brush or computer vacuum cleaner to remove lint and dust from the paper path. Ink cartridge cleaning Cleaning the inkjet print cartridge itself can correct the problem of missing lines or missing points, and can eliminate streaks on the paper, thereby improving printer performance. To clean the ink cartridge, follow these steps: 1 Turn on the printer and lift the top cover of the printer. After the printer cartridge moves to the center of the printer, unplug the power cable from the back of the printer. Remove the ink cartridge and place it on the paper sideways. Ink cartridge calibration color printers use both black ink cartridges and color ink cartridges. These ink cartridges must be calibrated frequently so that the printer will drip ink correctly side by side within text lines or graphics. For the following situations, use the printer utility to align the print cartridges. The black ink and color ink in the printout are mixed with each other. We Rimless Industry Co.,Ltd are the exclusive distributor, exporter and global brand licensor for REBORN PLLA products. Anti Wrinkle Filler,Anti Aging Filler,Biostimulatory Fillers,Eyes Dermal Fillers Rimless Industry Co.,Ltd. , https://www.rebornplla.com
2 Open the document access door.
3 If the white strip (located inside the document access door) is stained with dirt, use a dry cotton swab to clean it. If there is still dirt or debris on the strip, use a cotton swab moistened with a small amount of isopropyl alcohol to gently clean the white strip. (If you use alcohol, only a small amount of alcohol is needed. Alcohol dripping on the internal parts of the device will damage the device.)
4 If the glass strip opposite the white strip is stained with dirt, use a dry cotton swab for cleaning. If there is still dirt or debris on the glass strip, use a cotton swab moistened with a small amount of isopropyl alcohol to gently clean the glass strip.
5 Check the rollers inside the scanner for dirt or debris. Use a lint-free cloth moistened with water (such as lens tissue) to clean the dirty rollers.
6 Check whether the presser foot and the presser plate are stained with dirt or debris. If the presser foot and pressure plate are not clean, use a lint-free cloth moistened with a little water to clean it.
7 Using a dry, lint-free cloth, completely remove any remaining dirt on the roller, presser foot, and platen in the horizontal direction.
8 After the water traces are completely dry, close the document access door.
Ink stains accumulated in most inkjet printers are normal and do not need to be removed (alcohol or roller cleaner may damage the printer). In addition, do not use lubricants on the metal rod on which the print cartridge moves. The noise from the back and forth movement of the stand is also normal.
2 Wet a clean cotton swab, then squeeze out excess water.
3 Hold the black print cartridge with the nozzle plate facing upward.
4 Use a cotton swab to clean the surface and edges of the print cartridge. Please do not wipe the nozzle plate.
5 Check for residual debris on the ink cartridge. To check, move the ink cartridge near the light and tilt the ink cartridge at an angle. If you find dust, dirt, or fibers, repeat steps 3 and 4 to remove these residues.
Repeat steps 1 to 4 to complete the cleaning of the color print cartridge. When cleaning each ink cartridge, be sure to use a new cotton swab to avoid mutual contamination between the ink cartridges.
6 Reinstall the print cartridges, and then close the top cover of the printer. Connect the power cable, and then print a test page to ensure that the entire device is operating properly.
7 To avoid ink marks, it is necessary to clean both ink cartridges. Please also note that the ink cartridge should not be left outside for more than 30 minutes, otherwise the print head will be air-dried and the ink cartridge cannot be used.
There is a small gap between the color blocks in the printout and the black outline.
The print cartridge has been removed or replaced.
We offer Reborn PLLA Products--Reborn PLLA Dermal Filler, Reborn PLLA Hydrogel.
The main Function of PLLA is stimlulating collagen regeneration.
As we age, we will gradually lost collagen. We will have lines, even wrinkles on our face, neck, hands and body.
Normally, the first line appear is around eyes. Besides, more and more people always stay up late and they did not have enough sleep.
They will have dark circles, eye bags etc. All can be called under-eye hollows.
Under-eye hollows are characterized by dark circles, deep indentions and a tired appearance around the under-eye area.
Eye is one very important role on our face, if you have eye bags, dark circles or crow's feet, you will looked very "tired".
Reborn PLLA Dermal Filler and Reborn PLLA Hydrogel Filler could help you to solve the problems.
We have 4 specifications of Reborn PLLA Dermal Fillers :
150mg/vial, 1 vial in one box;
240mg/vial, 1 vial in one box;
360mg/vial, 1 vial in one box;
500mg/vial, 1 vial in one box.
And the 150mg/vial is mainly for foreahead and eyes, if you would like to get rid of black circles, eye bags, crow's feet, you could try it.
For Under Eyes: Reborn PLLA Dermal Filler could be injected to the dermis and produce more collagen to fill the hollow.
The Hydrogel Filler also could be used for under eyes:
it is 5ml/vial and 1 vial in one box.
It could be used by meso gun or hand, it is injected into upper dermis to improve the skin texture.
The Hydrogel Filler also could make skin whiten, moisture, tender.
We have received many feedbacks from our customers, they achieve their desirable effect.
For more information, please feel free to contact us.